Lightweight Jhemcu F411elvtx 1s-2s Aio Flight Control/ Elrs Receiver / 12a 4in1 Esc / 48ch 0-400mw Vtx 25.5mm Hole For Fpv Racing Drone Save 40% Now [xMEhjJ9P]

JHEMCU F411ELVTX, using STM32F411 processor, ICM42688-P gyroscope, integrated OSD, built-in 5V/1.5A BEC, built-in independent ELRS 2.4G receiver, built-in VTX 5.8G 400MW image transmission module, support 1-2S 12A brushless ESC quad. The board does not have a black box and barometer module. If you choose 1S power supply and encounter difficulties in starting the motor, please adjust the starting power value to an appropriate increase to the value that can be started. The AIO video transmission does not have the Low Power Disarm function enabled by default (it can be understood that the unlocked image transmission is the maximum power, and the locked image transmission is the minimum power, which can reduce the temperature of the PCB during switching). If the built-in ELRS is not used, an external SBUS receiver can be supported.

Technical parameters:

Model: JHEMCU F411ELVTX

Main control chip: STM32F411CEU6 (100MHZ, 512K)

Gyroscope: ICM-42688-P

Barometer: None

OSD chip: AT7456E

Black Box: None

LED programming: Yes

BB Ring: Yes

Input voltage: 1-2S

I2C interface: Yes

BEC：5V/1.5A 

Camera input: Yes

Serial control port: two (UART1 for internal ELRS receiver and external SBUS, UART2 for internal 5.8G VTX Smart Audio)

Flight controller firmware: Betaflight 4.4.2 JHEF411. HEX

ESC current: 12A*4 

Galvanometer: Yes

Firmware: BLHELI_S Z-H-30. HEX

Support for Bluebird: Support 24K 48K 96K

The default ESC drive protocol of the flight controller: DSHOT300

Receiver type: ELRS

Receiver frequency: 2.4G

Receiver signal protocol: CRSF

Receiver firmware: JHEMCU EP24. V3.0.0

Whether to support WIFI update ELRS firmware: Yes

Video transmission frequency: 5.8G

Video transmission channel: 48CH

Image transmission power: 25mw, 100mw, 200mw, 300mw, 400MW

OSD tuning protocol: Smart Audio

Hole position and shock absorbing ball hole position conversion: M3, 25.5*25.5MM

Maximum dimensions: 30*30MM

Weight: 4.4g