Money Saver Rack And Pinion - Power - 1967-72 Chevy C10 - W/disc Brakes - 8011650-01 - Ships Same Day [AWQqajdm]

Revitalize your old C-10 with our Bolt On rack & Pinion kit – great steering and handling - no bump steer. Put the old steering box out to pasture – not your Truck!

On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms.

This kit is for rear-wheel-drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two-groove pulley on your water pump is required for this kit.

Note: If using drum brake spindles order kit 8011900-01.

Click to view instruction sheet

Kit Contents PDF Download

Tech Info:

Pinion Type/Size:  3/4"-DD

Amount of Travel:  5.75"

Turns Lock to Lock:  2-7/8 Turns

Pressure Port Size:  Straight to #6 AN (upper)

Return Port Size:  Straight to #6 AN (lower)

Pump Required:  Low Flow

Inner End Threads:  M14 x 1.5

Outer ends:  8026690

Kit Includes:

Rack and Pinion

Mounting Bracket

Mounting Hardware

Outer Tie Rod Ends

Pump and Line Kit

Steering Shaft Kit