Viral Aim Taipan Handlebar Switch Pro Version [dtS4FNml]

AiM Taipan Handlebar Switch

The AiM Taipan Handlebar Switch is the best way for changing the behaviour of your bike.

Key Features :

AiM Taipan Handlebar Switch

The AiM Handlebar Switch is the best way for changing the behaviour of your bike, it features 2 pushbuttons and 10 LEDs and manages the following settings:

Up to 5 selectable maps
Apply fuel corrections
Activate traction control
Activate launch control

The lower push button on the device is used for changing a feature, while the upper push-button is for choosing one of the possibilities inside the selected feature.

The LEDs on the handlebar switch can be used as a Shift Light Module. Set your required RPM value and the LEDs will start to blink promoting a gear change.

Please Note: The Handlebar Switch is an accessory and you will need to purchase the Taipan ECU and UC-Bridge to enable all the below functions.

Running Maps

Maps are a combination of all the parameters governed by the ECU directly related to engine performance and consist of different tables. The main maps are the fuel and ignition. You can also set up tables of various strategies and sensors.

Fuel Corrections

A correction is the possibility to get a fatter or leaner fuel mixture at different RPM ranges: low, mid and high. The RPM threshold, as well as the percentage, apply along with the default value. This can be done during configuration in maps.

Please Note: Fuel Corrections are enabled in the selected map - this is done during the ECU Maps configuration.

Traction Control

Traction control is used to stop your wheels from spinning when you apply any excess power. You can activate traction control by keeping the lower button pushed down until the green LED beside the TC label appears. To de-activate simply hold down the lower push button.

After pressing down the lower pushbutton and the green TC LED appears, you can select using the upper pushbutton how strong the Traction Control Strategy is supposed to be with (1) being the weakest wheel block to (5) being the strongest wheel block.

Please Note: Traction Control is enabled in the selected map - this is done during the ECU Maps configuration.

Launch Control

The handlebar switch can be used to activate launch control which will assist you to accelerate from a standing start. To activate simply push both the upper and lower buttons on the handlebar switch together, wait a few seconds and the red LEDs will start to blink and the strategy will be engaged.

Please Note: The Launch Control has to be enabled in the selected map - this is done during the ECU Maps configuration.

High Technology 32-bit Core - Optional Extra

Engine control requires precision. At 20,000 RPM the Taipan ECU guarantees the precision of 1/10 of the degree: this means an accuracy within 0.8 uses for turning the spark ON!

This precision is the key to guarantee :

A very consistent engine rotation.

The possibility to repeat dozens of tests at the bench, always obtaining the same exact result.

A perfect reactivity at every minimum change of any point of a map, resulting in more power at the wheel.

UC Bridge - Optional Extra 

The UC Bridge is the connection between the CAN bus of the ECU and the USB port of your PC. It is available in 2 different licenses :

User License : A Taipan ECU comes with some basic maps that already give you better performance than the stock maps. Highly professional tuners all over the world offer specific maps that better fit your requirements, managing, for example, different exhaust, two injectors etc.

The UC Bridge is required for two functions :
- Transfer new and different maps to your ECU through the User License UC Bridge.
- Receiving diagnostic information from the Taipan ECU.

Tuner License :

With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.

*Please Note: For information regarding the UC-Bridge Tuner, please contact one of our AiM technical team for further information.

Taipan ECU Connections

The Taipan ECU has 4 connectors :

Main Connector - Compatible with most off-road bikes.
CAN Connector - Connects to the Handlebar Switch and Data Logger.
2nd CAN Connector - Connect to the UC Bridge, in order to communicate with the PC.
3rd Connector - Connect to spare analogue inputs and to a possible second injector.

Technical 

AiM Taipan Handlebar Switch

• JST waterproof connector for CAN Bus communication
• Connector: n.1 JST 04T-JWPF-VSLE-S Connector
• Body: PA6 + 30% glass fiber
• Dimensions: 47.3 x 24.9 x 48.1mm
• Waterproof: IP65
• Weight: 70g

What's in The Box

AiM Taipan Handlebar Switch

• 1 x Taipan Handlebar Switch

Video

Downloads

User Guide	Technical sheet	Race Studio 3