New Arrival Aim Taipan K Motocross Ecu Plug & Play Now 80% Cheaper [kOYyUICL]

Aim Taipan K ECU Plug & Play Engine Control Unit

Taipan are the brand-new aftermarket plug & play ECUs created by Aim, exclusively designed for off-road motorcycles.
Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness.
The latest addition, the Taipan K, was specifically designed for 2 stroke KTM/Husqvarna/GASGAS 2024.

Taipan ECU Connections

The Taipan ECU has 3 connectors :

Main Connector - Compatible with 2 stroke KTM/Husqvarna/GasGas 2024
CAN Connector - Connects to the Handlebar Switch and Data Logger.
2nd CAN Connector - Connect to the UC Bridge, to communicate with the PC.

Taipan Key Features & Advanced Strategies

The possibility to configure and to set your bike, thanks to the many different strategies and corrections implemented, is really endless. Here down, a list of the most important:

High Technology 32-bit Core

Engine control requires precision. At 20,000 RPM the Taipan ECU guarantees the precision of 1/10 of the degree: this means an accuracy within 0.8 uses for turning the spark ON!

This precision is the key to guarantee :

A very consistent engine rotation.

The possibility to repeat dozens of tests at the bench, always obtaining the same result.

A perfect reactivity at every minimum change of any point of a map, resulting in more power at the wheel.

UC Bridge Tuner - Optional Extra 

The UC Bridge is the connection between the CAN bus of the ECU and the USB port of your PC. 

Tuner License :

This is the Tuner that is required to configure the unprogrammed Taipan ECU.

With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.

*Please Note: For information regarding the UC-Bridge Tuner, please contact one of our Aim technical team for further information.

Aim Handlebar Switch - Optional Extra 

The Aim Handlebar Switch is the best way for changing the behaviour of your bike; it features 2 pushbuttons, 10 LEDs and manages the following settings :

The handlebar switch can also be used as a shift light module.

Below shows a functional diagram of products that can be added to the Taipan ECU:

Technical

Aim Taipan ECU Plug & Play Engine Control Unit

• Two 0-5V analogue inputs sampled @ 1,000Hz each, could be alternatively used as switch to ground
• One low side driver (1A)
• 1 CAN bus for calibration purposes
• IMU
• Pitch/Roll
• Power consumption: 150 mA
• Connectors: n.1 JST 04T-JWPF-VSLE-S connector, n.1 JST 08R-JWPF-VSLE-D connector, n.1 64 pins male connector
• Body: PA6 + 30% glass fibre + EPDM cover
• Dimensions: 112 x 100 x 40.8mm
• Weight: 390g approx
• Waterproof: IP67

What's in The Box

Aim Taipan ECU Plug & Play Engine Control Unit

• ECU Taipan K Control Unit
• Your Choice of Accessories

Downloads

User Guide	Tuning Manual	Technical sheet	Race Studio 3	Spark Tuning Software