User-friendly 2001-2010 Gm 2500/3500 Hd Stage3 Forged Tie Rod Assemblies - Kit (pair) Quality Assured [XEF0aZp6]

HD Stage3 Forged Tie Rod Assemblies for 2001-2010 GM 2500/3500

These tie rods are overkill for some, but when it comes to steering components, failure is not an option.

These tie rod assemblies are the best of the best. Featuring a 1.5" wide forged tie rod, massive 2 1/3" ball joints, and a much larger and stronger, adjustable inner ball joint. The outer tie rod end contains a spring-loaded gusher bearing that maintains constant pressure. 

When compared to factory components:
30% larger toe adjusting shaft
53% larger tie rod body
35% larger outer ball joint
28% larger, adjustableinner ball joint

OEM part numbers for reference:

Inner tie rods - AC Delco 46A1311A/GM 19435545, 

Outer tie rods - AC Delco 46A1093A/45A1093.

Note

1) Do not exceed 500 PSI of pressure when applying grease will risk damage to grease caps causing tie rod failure and will result in voiding your warranty. 

2) PPE Stage3 Tie Rods are engineered to fit GM stock steering components. Some aftermarket steering manufacturers have changed the placement of the tie rod mounting perch on the front spindle, which then requires a shorter tie rod. The Stage3 Tie Rod outers are fully-threaded internally and may be trimmed to accommodate the relocated aftermarket perch location. An experienced installer should measure to determine the appropriate trim length.