Fast Shipping Stm Standard Lightweight Front Drag Brake Kit Wrx / Sti 2005-2021 Don't Wait [jCh1uxrz]

Vehicle Fitment:
2005-2021 Subaru WRX
2005-2021 Subaru STi
• Fits 5x114.3 ONLY
(Does NOT fit 2002-2004 WRX)
(Does NOT fit 2004 STi)
(Does NOT fit 2022 WRX)

STM Front Drag Brake Kits for 2005-2021 Subaru WRX and STi allow you to ditch the weight of your big, heavy stock rotors and calipers and clears room to run 15" wheels and slicks for drag racing applications and lose almost 50 pounds. We all know less rotating mass is the best way to free up power!

More Info:
The STM brake kits include Wilwood calipers and your choice of standard rotor or the lightweight scalloped rotor, custom STM aluminum mounting brackets, black anodized rotor hats, STM brake lines and all mounting hardware. The rotors will ship pre-assembled to the hats with safety wire as pictured.

The scalloped rotor is 2.7 pounds lighter than the standard rotor and is recommended for cars that see more miles on the drag strip than on the street. The scalloped rotor is not a street rotor.

• This brake set-up is specifically designed for drag racing
• This is not intended for constant, on/off braking as in road-racing or autocross
• Will clear most 15" wheels

STM Weights:
STM Front Scalloped Kit (per side): 11.80 pounds
STM Front Standard Kit (per side): 14.50 pounds
Front Scalloped Rotor: 6.55 pounds
Front Standard Rotor: 9.30 pounds
Front Wilwood Caliper: 3.20 pounds

2015 WRX Weights:
Front Rotor: 14.2 pounds
Front Caliper: 13.1 pounds

2008 STi Weights:
Front Rotor: 22.60 pounds
Front Caliper: 10.5 pounds

Savings:
Save ~ 46.8 for STi
Save ~ 35.2 for WRX

STM Front Brake Kit Contents:
(2) STM Rotor Hats (STM-00-SUBI-FBH)
(2) STM Caliper Brackets (STM-SUB)
(1) STM Brake Lines (STM-02PLUS-WRX-FRTCL)
(2) Wilwood Front Rotors (Standard 160-5841 or Scalloped 160-8135)
(2) Wilwood Front Calipers (WIL-120-13844)
(2) Wilwood Street Brake Pads (150-8850K)
(2) Wilwood Hat Bolts (WIL-230-0150)
(4) M10x30 Bolts (FAS-1139619)
(4) M10 Washers (FAS-1140384)
(4) M12x35 Bolts (FAS-1139655)
(4) M12 Washers (FAS-1140385)

IMPORTANT NOTES - For Drag Racing Only!
These brakes are designed for OFF ROAD USE ONLY and drag racing applications. They are NOT intended for consecutive, hard braking. These are not for road racing or autocross or daily street use. While these are also the same brakes we run on our STM 8 second cars, as with anything performance-oriented, please be sure to check and double-check every aspect for safety, EACH AND EVERY PASS! Please use your discretion and drive safely.