Influencer Pick Toyota 3rd Gen 4runner 4x4 & 2wd Kit [must See] [ygNGEtCM]

MAKE -Toyota Tacoma and 4 runner

LIFT - 3 to 4 inches

TIRES PUSHED FORWARD - 3/4"

WIDER PER SIDE - 3.5"

TIRE SIZE RECOMMENDED - 33's with Fenders

WHEEL TRAVEL - 13"

UPPER ARMS – Powder Coated 1.5" 4130 tube with 1" uniball

LOWER ARMS
Our powder coated boxed lower arm made from 10 gauge cold rolled  steel Using a hard polyurethane bushings and 1” DOM sleeves at the frame pivot. This kit comes set up so that you can run a coil over, bypass shock and bump stop if wanted.

SPINDLE - Stock

PARTS INCLUDED
- 4130 upper uniball arms.
- Powder coated boxed lower arms.
- Stainless steel brake lines.
- Limit straps and  limit strap tabs.
- Steering extension
- Coil over mounts
- All grade 8 hardware

FEATURES
- Uses stock pivot points
- Increases wheel travel
- Increases track width
- Dual shock ability with bump stop
- Just about endless shock options
- Easy install
- Made in the USA

RECOMMENDED PARTS
- Fiberglass fenders
- Tundra 4x4 axles

Please note that you be required to re-drill the upper shock mount 3 bolt pattern to match the Tacoma pattern.

RECOMMENDED PRODUCTS FOR SALE

King 2.5 x 8” Remote Res Dual Rate Coil Over -	King 2.5 x 8" Remote Res Free Bleed Shock -
King 2.5 x 8" Remote Res 2-Tube Bypass Shock -	King 2.5 x 8” Remote Res 3-Tube Bypass -
King 2.0 x 2" Hydraulic Bump Stop with Weld Can -	Toyota Rear Suspension Parts (springs, hardware, shackles)
Weld on Bypass Shock Mount - $325.00	4x4 Tie Rod Kit - $249.95
4x4 Tie Rod Race Kit - $389.95