New Arrival Dichrolam- "black Sea"- Rigid/machinable Plate- Various Sizes Smart Choice [R5PE7Bte]

Dichrolam: Black Sea

Some pieces may be surface sanded for more uniform thickness and will need to be finished and polished.

*Due to the unique hand made lamination procedure for producing Dichrolam, optical thin film dichroic core uniqueness, its high reflectivity and said reflectivity’s ability to disguise and hide minor imperfections, the following minor visual aberrations may be present:

• Occasional bubbles up to 1/16” DIA

• Microbubbles may be present throughout, though undetectable at six foot viewing distance.

• Occasional dust specs or foreign matter within lamination layer due to manual, “hand made” nature of the manufacture.

• Surface scratches

What is Dichrolam?

Working with Dichrolam:

Cutting- Cut with the back side up(black side) to eliminate the risk of delamination from the resin.  Use fine tooth blades or diamond blades for best results.

Shaping/Finishing- use sharp belts and abrasives for best results.  Finish similar to other resin materials.  Sand to high grit and then final polish with automotive heavy cut compound(something like Meguiar's 105), slow RPM's on foam pad, NOT high speed cotton wheels with wax stick compounds.  The top resin is clear so you want that to be polished for optimum appearance.

Temperature-  This material is not suitable for frequent extreme temperature variations.  Avoid putting in dishwasher or thermal cycling at extreme cold temps.  For best results you may use a liner to provide an insulating layer between steel and Dichrolam.  If larger temperature variations are anticipated, use fasteners without epoxy to attach the Dichrolam.