Name: Innovative Tb24 Yandina Trollbridge24 Battery Combiner Diy Kit [45AaXCMb]
Brand: mappa-mercia.org
SKU: HBS8338809726
Price: 27.99 USD
Availability: InStock
Rating: 4.51 (401 reviews)

Innovative Tb24 Yandina Trollbridge24 Battery Combiner Diy Kit [45AaXCMb]

Replaced with the Trollbridge 24 Smart Shore by Hypertech

The Yandina Trollbridge24 Combiner allows you to charge your 24 volt trolling motor battery from the 12 volt alternator on your main engine or trailer hook-up. It works by automatically putting two 12 volt batteries in series when you need to run the trolling motor and in parallel for charging. It is bi-directional so when not trolling, the trolling booster battery backs up your starting or house battery.

The Trollbridge24 is suitable for installations with alternators up to 100 amps and 24 volt trolling motors up to 85 amps. For larger installations you can use the Trollbridge2400 for 200 amp alternators and motor up to 500 amps.

WARNING: Cancer and reproductive harm. Visit www.p65warnings.ca.gov

FEATURES

Fully automatic, no switches or connectors to change
Both batteries operate in parallel when not trolling
The bottom battery can be used as a house or starting battery even when trolling
The two trolling batteries do not have to be matched or balanced
Lithium compatible with matched Lithium batteries
A single output 12 volt charger will change all batteries
Works with minimal 2 battery systems or in conjunction with a house battery
Can be conveniently located with the batteries
Rated for 12 volt alternators up to 100 amps
Rated for 24 volt trolling motors up to 85 amps
Green LED indicates 24 volt output active
Compact. 4" long including mounting tabs, 2" wide, 1.5" high (plus cables)
Charging is done at 12 volts so your motor never sees charging voltages
Over 99% efficient - faster charge - no wasted power- no heating
Waterproof rated IP68 Protected from long term immersion
Ignition rated for explosive atmospheres
No voltage drop so batteries reach full charge
No voltage drop so motor gets full power
No wasted power, no heat sink or cooling required
No modification to alternator or 12 volt engine wiring
Simple 5 wire basic installation
Comes with all cables for basic hookup
Draws no current when off - no on/off switch needed
No diodes to burn out if accidentally shorted
Withstands ambient temperature to over 175 F (80 C) for engine compartment mounting