When you need to be absolutely certain your valuables are protected, you can count on a Graffunder.

Since 1968, Graffunder Safes and Vault Doors have been hand-crafted for commercial and residential use. Guided by the philosophy "quality over quantity", our products exceed industry standards at every level and in every area. With a specialty in custom work, this business has earned its reputation as "the Rolls Royce of Safes".

2 1/2" overall body constructed of 1" A36 high tensile steel outer and 14 & 16 ga. inner plates enclosing a high-density composite material. 4 1/2" overall door insulated with U.L. approved insulating material, outer plate being 1 1/2" thick A36 high tensile steel.    

Custom Quote Required for ALL Graffunder Safes & Vaults. 

Please Note: These are custom built safes. Pricing varies based on current price of steel/materials. Price quotes are only good for 72 hours.  

Additional Features:

• 8 to 10 solid 1 1/4" stainless steel locking bolts, active front and back to prevent door removal after hinge attack
• U.L. listed group II combination lock, with re-lock and 1 million possible combinations
• Additional relocking devices activated by tool and/or torch attack for added security
• Lock protected by Ball Bearing Anti Drill Barriers
• Fully recessed, tightly tolerance door for protection against forced entry
• High temperature heat seal door jamb with additional intumescent fire and smoke seal
• Hardened hinge pins that ride on thrust bearing washers
• Attractive paint finishes to choose from
• Variety of interiors to choose from
• All safes covered by limited lifetime warranty

Additional Features of Emperor and Fortress Rating as follows:

• U.L. approved Group 2M combination lock
• Additional anti-drill barrier protects bolts from punching attack.

Door Security Features:

Mounting Block – Back: Showing ball-bearing placement holes.

Mounting Block – Front: Front face of mounting block.

Mounting Block – Front: Front face of mounting block with lock placement.

Mounting Block – Front: Front face of mounting block with cover plate over lock.

Mounting Block – Front: Front face of mounting block with lock cover plate top, and snubber bar block bottom.

Mounting Block – Front: Front face of mounting block, top view with relocker cable attachment. Also shows lock cover plate and snubber bar block at left.

Mounting Block – Front: Shows mounting block from the right side. Top level right, lock cover plate. Lower left, snubber bar block.