Big Discount Benro Moveover8b Carbon Fiber Slider And Case | 23.6" Diy Kit [CshqEwJ9]

The Benro MoveOver8B Carbon Fiber Slider, accompanied by a protective case, features an aluminum slider carriage that operates on carbon fiber rails, providing 23.6 inches of effective carriage travel. The carriage is designed with a flat mounting surface equipped with a 3/8"-16 threaded mounting stud, suitable for attaching a flat base fluid head. Additionally, it incorporates pre-tensioned roller bearings to ensure a seamless glide. A friction brake, adjustable via a single knob, allows for fine-tuning of the slider's resistance or can be utilized as a brake when the slider is positioned horizontally.

The slider is equipped with carbon fiber rails measuring 18mm in diameter and can accommodate a maximum load of 17.6 pounds. It can be affixed to a tripod or stands, or positioned on a flat surface. A built-in bubble level allows for easy verification of the slider's levelness. Each leg attaches to the ends of the slider track through a rosette and is capable of rotating 360°. Additionally, each foot offers approximately 4 inches of height adjustment to facilitate leveling. The slider can be operated at any angle between 0 and 90°, and it is also possible to undersling the slider.

• The adjustable legs can be moved throughout 360° of rotation. However, they are at their most supportive between 12 and 60°.
  
  
• The track ends allow you to mount the slider on stands using the Baby pin slot. Each track end features 1/4"-20 and 3/8"-16 threaded mounting holes.
  
  
• The slider can also be mounted directly onto a tripod using the 3/8"-16 or 1/4"-20 threaded mounting hole on the attached cheese plate.
  
  
• The carriage has four 1/4"-20 threaded mounting holes for accessories.